What Can Safe Mode Do for You?

Safe mode is a troubleshooting option for Windows that starts your computer in a limited state. By running your computer in safe mode, non-essential processes do not start and non-core components are disabled and you can fix many computer errors. Here will show you how to reset  Windows password, delete stubborn files and get rid of virtues.
Reset lost Windows Password
Bypassing a lost Windows password is not as difficult as you think. Forgot Windows password? Start your computer, press F8 to enter safe mode to reset it. Once you are in safe mode, you can follow the steps listed below to reset the lost Windows password:
1.       Right-click Computer to select Manage.
2. In the coming Local Users and Groups screen, double-click Local Users and Groups, and then click Users.
3. Right-click the account that you need to reset the password for, and then click Set Password.
4. Type and confirm the new password.
Delete Stubborn Files
When you intend to delete some files or empty the recycle bin, sometimes an error message that “Cannot delete file because it's being used by another person or program” may appear, though these files are not in use actually.  A recommend solution to fixing this problem is to boot your computer into safe mode and delete them. By running your computer in safe mode, non-essential processes do not start and non-core components are disabled. In another word,
Get Rid of Viruses
Safe mode is a boot option in the Windows operating system that starts the system in a reduced functionality mode. This reduced functionality has the advantage of making it easier for antivirus programs to remove viruses from the computer, since more system files are freed up for scanning and disinfection. If you have a virus you cannot delete or if your system will not boot up correctly and you suspect a virus is the problem, you can run virus scanning in Safe Mode by using the following steps.
1. Launch your anti-virus software and run a virus scan on your "C:" drive. The screen will flicker, and you will see your computer revert to its "Setup" mode. This is normal. A thorough scan can take anywhere from 30 minutes to several hours, depending on the size and percentage of free space of your hard drive.
2. Reboot your computer and allow it to go into normal mode. Your anti-virus software should produce a virus report, detailing what malware was found during the scan in safe mode.
Well, you can do many significant things with safe mode. Next time, if you forgot Windows password, just try with this safe mode, which can do a great favor for you.

How to Create and Use a Windows XP Password Reset Disk?

This article describes how to create and use a password reset disk in Windows XP. You can use a password reset disk to gain access to your Windows XP-based computer if you forgot Windows  password.

How to create a Windows XP password reset disk

To create a  Windows password reset disk for your local user account, use one of the following methods.

Requirements

The following methods require one blank, formatted floppy disk.

Use a computer administrator account

If you logged on to the computer by using an administrator account, follow these steps to create a password reset disk for a user account:

1. Click Start, and then click Control Panel.
2. In Control Panel, click User Accounts.
3. In the User Accounts pane, click the account that you want to work with.
4. Under Related Tasks, click Prevent a forgotten password to start the Forgotten Password Wizard, and then click Next.
5. Insert a blank, formatted disk into drive A, and then click Next.
6. In the Current user account password box, type the password for the user account that you chose in step 3, and then click Next.Note If the user account does not have a password, do not type a password in the Current user account password box.The Forgotten Password Wizard creates the disk.
7. When the Progress bar reaches 100% complete, click Next, and then click Finish.
8. Remove and then label the password reset disk. Store the disk in a safe place.

How to log on to the computer by using a Windows XP password reset disk

If you forget your password, you can log on to the computer by using a new password that you create by using the Password Reset Wizard and your password reset disk. To do this, follow these steps:

1. On the Windows XP logon screen, click the user name that you want to use. The Type your password box appears. Press ENTER or click the right-arrow button. You receive the following error message:
   Did you forget your password?
   You can click the "?" button to see your password hint.
   Or you can use your password reset disk.Please type your password again.
   Be sure to use the correct uppercase and lowercase letters. 
2. Click use your password reset disk. The Password Reset Wizard starts. The Password Reset Wizard permits you to create a new password for your user account.
3. Click Next.
4. Insert the password reset disk into drive A, and then click Next.
5. Type a new password in the Type a new password box.
6. Type the same password in the Type the password again to confirm box.
7. In the Type a new password hint box, type a hint to remind you of your password if you forget the new password.Note This hint is visible to anyone who tries to log on to the computer by using your user account.
8. Click Next, and then click Finish. The Password Reset Wizard quits, and you return to the Windows XP logon screen.Note The password reset disk is automatically updated with the new password information. You do not have to create a new password reset disk.
9. Type your new password in the Type your password box, and then click the right-arrow button to log on to the computer.

Troubleshooting

• The password reset disk cannot be used to resetWindows password on another computer.The password reset disk that you create can only be used with the computer it was created on. For example, if you have two Windows XP-based computers that have the same user names and passwords, a password reset disk that you create on the first computer cannot be used to reset the password on the second computer.
• The password reset disk contains sensitive information.Other users may be able to use the password reset disk to gain access to your computer. For this reason, store this disk in a safe and secure location.

How to Enable Windows Vista Administrator Account?

In Windows Vista there is a difference between accounts with “computer administrator” privileges and the Administrator account. In the Administrator account the User Account Control is disabled. Also by default, the Administrator account is present, but hidden and disabled.
Here are the detailed tutorials  that will teach you how to enable the Windows Vista Administrator Account.

1. Start by booting your computer to Vista in your computer administrator account Next open administrative tools in the control panel. Double click the computer management item to open it.
2. You then authorize user accounts control by clicking the continue button.
   • Double click on “local users and groups”, this will open it.
   • Click the user’s folder.
   • Select the administrator icon.
   • Right click it to open its content menu.
   • Choose properties.
   • Remove the check mark from the “account is disabled” box.
   • Click OK.
   • Restart your computer.
3. Once your computer has restarted, open the administrative tools control panel.
4. In the Users area, disable any other enabled accounts with computer administrator privileges.
   • Look for account icons that do not have the red disable mark.
   • Click to place a check mark on these account icons.
5. Next you open Properties.
   • Click to add a check mark in the box labeled “Account Is Disabled.”
6. Check to see that your Administrator account is enabled.
7. You can now close Computer Management and restart Windows.
8. When vista reboots the administrator account will be loaded automatically.

Be advised that this method is for temporary use only, for security reasons. You should never leave your Administrator account enabled without a password.
Your Windows Vista Administrator account has now been enabled.
By the way, have ever encountered the trouble that  you lost or forgot Windows  password on Vista for the admin account? How to  deal with if the admin account has been disabled? Well, as this, it is a good chioce to reset Windows password with a third party software, such as Ophcrack, Kon-Boot or Windows Password Unlocker. They are all portable and efficient to reset the forgotten Windows Vista admin password quickly.

3 Measures to Speed up Your Windows 7 Password Reset

Windows 7 allows you to protect your user account with a password. When enabled, you're required to enter your password each time you log into Windows 7. This can become annoying if you frequently restart your computer. If you're the only user who has physical access to the computer, you may not need the extra security and can remove Windows 7 password protection entirely. However, most of the time we need the Windows 7 password for preventing prying eyes.
Well, on one hand, the password-protected measure keep our data and privicy security, on the other hand, it is a vital problem that if you forgot or lost Windows 7 password. Then how reset Windows 7 password in a right and quick way?
Measure 1: Windows 7 password reset with CMD Commend Line
If the computer is configured for local user authentication, passwords can be reset either through the graphical user interface or on the command line. Use the Windows command line when you need to quickly reset local account passwords.
Step 1: Login to the Windows 7 computer using the credentials of an account that has Administrator permissions.
Step 2: Click the "Start" button on the Windows 7 desktop and then click the"Search" box. Type "cmd" in the "Search" box and tap the "Enter" key.
Step 3: Type "net user account_name new_password" except replacing "account_name" with the name of the account that requires a password change and replacing "new_password" with the new password that you wish to assign to the account.
Step 4: Press the "Enter" key.
Measure 2: Windows 7 password reset disk is available
Windows password reset disk is taken as the easiest and safest way to reset lost Windows 7 password. If you have create a password reset disk in advance, just do it like this:

1. Windows will display a message that the password is incorrect if you put a wrong password. Click OK to close the message box.

2. Click Reset Windows Password, and then insert Windows password reset disk
3. Follow the steps in the Password Reset Wizard to create a new password.
4. Log on with the new password. You can use the same password reset disk instead of making a new one when you lost Windows 7 password again.
Measure 3:  With the Help of Windows Password Unlocker
There are so many  Windows password recovery tools in the market which help us to reset the forgotten Windows password. Just input" how to reset  Windows 7 Password" in google search,  you will find Windows Password Unlocker, a well-recognized and porfessional software to help your Windows 7 password reset issue with less than 5 minutes.
Now, it's time to reset the password with the top 3 methods and you can select one of the most suitable for Windows 7 password reset.

How to Run as Administrator in Windows?

Running as administrator simply means that you are in logged into your Microsoft Windows computer as the administrator role which has the ability to install programs and do anything else. The administrator is the account that can make all changes to the computer. However, security experts warn against running in an administrator account because if a virus gets into the computer, it typically functions off of a permission based system. In other words, because the administrator can do anything on a computer, a virus can execute anything if it comes in through the administrator account.
Then how to run as administrator? The first step is to right click on the file that you want to run. For example, if you downloaded AOL Instant Messenger and you want to install it, right click on the file of AIM. You’ll see a list of different tabs you could click. The one that you’re looking for is the “Run as Administrator.” When you click this, it prompts the computer to install the program because you have permission.
However, before it will install, you need to put in the administrator password and username. Punch those in and then hit enter. This specific program at this specific time will recognize the administrator and begin installation. However, that doesn’t mean that you’ve made your account an administrator account. If you tried to install another program without clicking “Run as Administrator,” it wouldn’t work. You have to do this each and every time.
Protecting the computer is important. The Run as Administrator feature allows you to protect your computer, still have the ability to install programs, and limit the amount of times you need to log out of one account and into the administrator account. It’s a simple trick to keep your computer safe. But there is also another vital trouble that if you forgot Windows password for admin account, how to fix it? Of course, if you have created a Windows password reset disk or password hint before, it is easy to deal with. Otherwise, I think you need to reset Windows password with a third party software like Ophcrack, Windows Password Unlocker etc.

How to Recover a Lost Windows XP Admin Password

Windows XP includes a default administrator's account for which the password is set up during the initial Windows installation. If you have forgotten this password, you will not be able to access your Windows XP default Administrator account. While you won't be able to recover the original password, as long as you have another account with administrative privileges, you will be able to log in and reset  Windows XP admin password.
Method 1: Reset Windows XP admin password with another available admin level account
1. Log into Windows XP with an account that has administrative privileges.
2. Click "Start" and press "Run." Type "mmc" (without quotation marks) and press "Enter."
3. Select the "Local Users and Groups" snap-in from the Microsoft Management Console window.
4. Expand "Local Users and Groups" from under the "Console Root" heading. Click on "Users."
Find the user named "Administrator" in the right side of the window. Right-click on the user name and select "Set Password." Press "Proceed" in the dialog box that appears.
Method 2: Reset XP admin password with "Ctrl+Alt+Del"
1. Restart your machine and hit Ctrl+Alt+Delete twice. Enter the name of the administrator account and type in the password. Hit "Enter" to log in.
2. Go to the "Start" menu. Go to "Run". Type in "control userpasswords2" and click "OK".
3. Select the administrator account under the "Users" tab. Click "Reset Password". Type in a new password and select "OK".
Note: if you take this measure, make sure you can log on as administrator.
Method 3:  Reset Windows XP password with a third party software
Most of us did not create a password reset disk or there is no another available administrator privileges account, what would you do to reset Window xp admin password? Well, just take it ease, a third party software named  Windows Password Unlocker can help you solve Windows password recovery issue on Windows XP. As is known, Windows Password Unlocker is professionally designed to reset Windows local and admin password on Windows 7/XP/Vista/2000 and Windows Server 2003/2008 with a bootable CD/DVD/USB quickly and keep all the data in the locked PC safety.